![Cebora PLASMA PROF 164 HQC Service Manual Download Page 48](http://html1.mh-extra.com/html/cebora/plasma-prof-164-hqc/plasma-prof-164-hqc_service-manual_2577545048.webp)
CEBORA S.p.A.
48
5.6
- Settings board (54), code 5.602.237.
5.6.1
- Topographical drawing.
5.6.2
- Connector table.
Conn. Terminals
Function
J1
1
“nozzle current” signal input.
J1
2(+) - 3(-)
+15 Vdc output to nozzle current transducer power supply.
J1
4(+) - 3(-)
-15 Vdc output to nozzle current transducer power supply.
J2
3(+) - 2(-)
+15 Vdc output to output current transducer power supply.
J2
1(+) - 2(-)
-15 Vdc output to output current transducer power supply.
J2
4
“Power Source output current” signal input.
J3
1
GND.
J3
2
“fast nozzle current” signal output.
J3
3
current reference input.
J3
4
start command input for settings board (54).
J3
5
“fast Power Source output current” signal output.
J3
6
“slow Power Source output current” signal output.
J3
7
GND.
J3
8
NU.
J4
1 - 2
igbt output command, on pilot arc board (58).
J5
1(+) - 2(-)
+8 Vdc output for control board (38) power supply.
J6
1 - 2
18 Vac input for settings board (54) power supply.
J6
5 - 6
20 Vac input for settings board (54) power supply.
3.302.218
9/8/2006