CEBORA S.p.A.
13
3.2.2
- Gas Console commands and signals.
3.2.3
- Power source operation.
WARNING
DURING THE FOLLOWING TESTS, DO NOT POINT THE TORCH AT PEOPLE OR
PARTS OF THE BODY, BUT ALWAYS TOWARDS AN OPEN SPACE OR THE
WORKPIECE.
NOTE
Steps marked with this symbol refer to actions by the operator.
♦
The operations marked with this symbol refer to machine responses that must occur following
an operator action.
System shut off and disconnected from the mains.
Complete the pneumatic gas circuit by connecting the Gas Console, Valve Console and Torch
according to the diagram in fig. 2.1.1.
Connect the Gas Console to the Power Source using extension art. 1189.
Connect the Torch to the HV18 Unit. For more details on the connections, follow the
instructions provided in the Instruction Manual of the Plasma PROF 164 HQC.
Connect the Unit HV18 to the Power Source using the supplied extension art. 1179. This
extension also incorporates the coolant liquid lines.
3.302.218
9/8/2006
