7
operation cannot be
guaranteed with the use of
inductive paging systems (25-
40 kHz).
However hazards can still occur
during operation
Hazards to personnel when
safety regulations are not
complied with,
Hazards due to improper
use of the device.
Only operate the system and
parts connected to it when they
are in a technically perfect
condition, and comply with
the safety and hazard infor-
mation given in these as-
sembly and operating in-
structions,
the work and safety instruc-
tions issued by the operator
of the system,
the installation and operat-
ing data given in „4 Specifi-
cations“ and in the CEAG
Catalogue „Emergency
Luminaires and Emergency
Lighting Systems“.
Faults that can affect the opera-
tion or safety of the system
must be reported immediately
to the company officers and
remedied.
The applicable work and safety
regulations are set out in these
assembly and operating in-
structions, and in
the management’s internal
organisational measures as
described in
–
«2 Safety instructions »,
–
«5 Important Informati-
on about Safety at Work
and the Safe Operation
of an Emergency
Lighting System»
and the general and spe-
cialist technical guidelines
and accident prevention
regulations.
CEAG can give no warranty or
accept any liability for damage
or consequential damage
caused as a result of
improper use,
failure to comply with regu-
lations and codes of con-
duct for the safe operation
of the system,
unauthorised or inexpert
modifications
– to the connections and
settings of the system,
– or for programmingthe
system,
operating proscribed or
unsuitable devices or
groups of devices.
Note:
Only (switchable) CG-S
luminaires/ballasts
supplied by CEAG
Sicherheitstechnik
GmbH can guarantee
full functional scope
when operated in a
system with Star tech-
nology!
When using other bal-
lasts you should check
whether they meet the
requirements for an
emergency lighting
system and operation
on a CG 2000/ZB-S!
Warning!
When planning a light-
ing system with a CG
2000/ ZB-S system
you first establish
whether the proposed
electrical installations
satisfy local environ-
mental conditions.
Special environmental
conditions (e.g. areas
subject to explosion
hazards or areas with
an aggressive atmos-
phere) call for special
equipment and instal-
lations.
Caution!
You must also comply
with all statutes,
standards and direc-
tives of the country in
which the system is
installed and
operated.
