35
By default, the SD holds 66 or
130 files:
configcg.dat =
CG controller configuration
logbook.dat =
CG controller logbook
and (CG 2000):
config01.dat – config32.dat
= configurations of network
systems device XX
texte01.dat – texte32.dat =
text of network systems
device XX
or (ZB-S):
zbscfg01.dat – zbscfg32.dat
= configurations of network
systems device
zbstxt01.dat – zbstxt32.dat
= Text of network systems
device XX
Content of files:
configcg.dat: This file con-
tains the configuration of the
CG-Controller and is lo-
cated on the SD.
logbook.dat: This file con-
tains the logbook of the CG-
Controller and is also lo-
cated on the SD.
Depending on the controller
type (CG 2000 or ZB-S), addi-
tional files are saved on the
SD:
configxx.dat and
textexx.dat for controller
type = CG 2000
zbscfgxx.dat and
zbstxtxx.dat for controller
type = ZB-S
12 Secure-Digital-
Memory Card SD
12.1 Device configurations
12.1.1 Configuring devices
with SD
You can use the «Setup device»
/ «Dev. config.
←
←
←
←
←
SD» menu
item to configure devices.
This configuration can then be
transferred to the devices with
the Secure-Digital-Memory
Card SD (see Figure 2).
12.1.2 Reading the device
configuration and saving to
SD
You can use the «Setup device»
/ «Dev. config.
→
→
→
→
→
SD» menu
item to save the device configu-
ration to the Secure-Digital-
Memory Card (see Figure 3).
12.2 Logbook
Logbook entries are retrieved
by the system on a regular
basis. Entries that are read are
saved on the SD of the CG
controller.
If no SD is plugged in, the
logbook is located in EPROM.
12.2.1 Layout of the logbook
The logbook of the CG-Control-
ler is located on an SECURE-
DIGITAL-MEMORY CARD
(SD).
The CG-Controller logbook is
compatible with the logbook of
the CG 2000, i.e. the two have
the same structure.
