15
Line
Selection (main menu)
1
Test menu
2
Block, reset
3
Info device
4
Setup CG-Controller
5
Setup device
Operation:
Q
Flashing cursor = current
cursor position/selection
Menu Back to the main screen
Cursor position lower
Cursor position higher
Select menu item (Enter)
Operation:
Menu One menu level higher
Cursor position Line 1
→
3
Cursor position Line 3
→
1
/
Selection in Line
1:
Next/previous device
3:
Switch backing forth
between “no/yes”
Starts the functiontest or
durationtest
Operation:
Menu One menu level higher
/
Selection in Line
3:
Cancel „no/yes“
Exits the durationtest that is
currently running
Operation:
Menu One menu level higher
/
Selection in Line
3:
Switch backing forth
between “no/yes”
Starts the functiontest or
durationtest
9.4 «Test» menu
The menu displays in the «Test»
menu and its submenus are
described below.
Submenus that work in a similar
manner are combined
into a single description.
9.4.3 Cancelling the operating duration test
9.4.1 Starting the functiontest FT or durationtest DT for
individual devices
9.4.2 Starting the functiontest FT or durationtest DT for all
devices
Line
Display:
1
Durationtest
2
Cancel
3
All devices
n/y
4
Line
Selection (submenu)
1
Functiontest all dev
2
Functiontest one dev
3
Durationtest all dev
4
Durationtest one dev
5
Cancel durationtest
Line
Selection (submenu)
1
Functiontest all dev
2
Functiontest one dev
3
Durationtest all dev
4
Durationtest one dev
5
Cancel durationtest
Line
Selection (submenu)
1
Functiontest all dev
2
Functiontest one dev
3
Durationtest all dev
4
Durationtest one dev
5
Cancel durationtest
Line
Display:
1
Functiontest
2
All devices
3
Start
n/y
4
Line
Display:
1
Device address
1
↔
2
Functiontest
3
start
n/y
4
Device name
