Test
y
To set up the battery test
parameter Power, time duration
and voltage stop
y
Auto test to define the periodicity
of the test
Boost
To set up Boost, first enable it then set
up the parameter
y
Voltage per cell (from
manufacturer)
y
Boost can be activated on
voltage value : Voltage start. After
discharge below set volt per cell
the boost will be activated or if
Boost can be activate on
charging current value.
Boost can be activate
periodically.
Boost stop always if the duration
exceed the Stop value (seconds).
Alarms
y
Cell Low voltage : End of
autonomy alarm. Flexa will shut
down very shortly by LVD
y
Low Pre alarm : Pre-notification
of low battery voltage
y
Autonomy pre-alarm : Set the
% of capacity available after the
alarm
y
Remaining capacity alarm % of
autonomy available
38
– Flexa 200 - 400/400 – User Manual – v1.0
Toolbar
Summary of Contents for FLEXA 200 400/400
Page 17: ...17 Flexa 200 400 400 User Manual v1 0 Hardware setup Page 2...
Page 69: ......
