CE+T Power FLEXA 200 400/400, User Manual

Page: 58 / 69

3.4. SBP Breaker Selection
SBP Upstream and Downstream breakers are depends upon the number of Flexa Modules installed in the system.
Model Flexa 60 Flexa 160 Flexa 200 Flexa 380 Flexa 580
Capacity
Flexa Max System
Power (kVA)
60 kVA 160 kVA 200 kVA 380 kVA 580 kVA
Each Flexa Module
capacity
20 kVA
Each SBP Module
capacity
200 kVA
SBP Max System
Power (kVA)
1 x 200 kVA 2 x 200 kVA 3 x 200 kVA
AC Input/ AC
Output
Rated current (A) 90 231 289 552 842
Breaker / Fuse (A) 125 315 400 630 1250
cable mm
2
35 95 150 2 x 150 3 x 150
PE Cable mm
2
35 95 150 2 x 150 3 x 150
ANNEXE 4. T4S Alarms
4.1. Supervisor alarms: T4S
This is the list of alarms issued by supervisor. Other alarms are issued by modules directly (see Flexa alarm table &
OCA document). The supervisor is able to generate alarms that are related to the system, to Flexas modules, or to
itself. Alarms related to Flexas will be seen as system alarms when module alarm is present on all Flexas.
Each alarm has a priority level. The level can be {disabled, event, minor, major}. If the level can be configured in user
interface, then it is marked as “mappable”, please refers to the last table for standard mapping.
Monitoring Alarms
Text
ID
Name Level
Def.
Map
Description/ Possible action
224 MBP engaged Mappable /
The system is in manual by pass mode. Disengaged MBP to
recover normal mode
225 Surge arrester Mappable /
Surge protection trip. Check & replace surge protection
device
226 Redundancy lost Mappable /
The defined redundancy for a group is lost. According to
config replace or restart faulty module
227 System saturated Mappable /
Load power is above the defined level (settable in
Saturation threshold parameter). Check load level and add
modules if possible or change parameter level
228 Main source lost Major /
Depending on the configuration, the AC input power source
is missing. Check AC input breaker or source presence
229
Secondary
source lost
Minor /
The DC source (battery) is not present or end of autonomy.
Check battery fuse or voltage
58 – Flexa 200 - 400/400 – User Manual – v1.0