CE+T Power FLEXA 200 400/400, User Manual

Page: 65 / 69

Module DC input alarms
Text
ID
Name Level
Def.
Map
Description
153
Source- no
voltage
Minor DC- V is under input not present threshold
154
brownout
(<150V)
Minor DC+ V is under extended lower limit for too much time
155
Source-
brownout
(<150V)
Minor DC- V is under extended lower limit for too much time
156 Not defined 61
157 Not defined 62
158 Not defined 63
159 Not defined 64
Module AC input alarms
Text
ID
Name Level
Def.
Map
Description
160 Start Minor
161
Temperature
derating
Minor Power is decreased due to high temperature
162
Temperature too
high
Minor ACin converter stopped because of too high temperature
163
Temperature
sensor fail
Minor Communication with temperature probe was lost
164 Auto-calib error Minor Error during auto-calibration of current offsets
165
Impedance Too
High
Minor AC input too high impedance detected
166 Backfeed error Minor Input stopped because of backfeed on it
167 Not defined 72
168 Overcurrent Minor Too many consecutive ACin over-current trips
169 Driver not ready Minor Hardware driver not ready signal received
170 Driver fault Minor Hardware driver fault signal received
171 Driver perturbed Minor
Too many consecutive “not ready”/”fault” from Acin driver
or more than a threshold over some hours
172 Not defined 77
173 Not defined 78
174 Not defined 79
175 Vres Absent Minor Fast alarm when source V is no longer present
65 – Flexa 200 - 400/400 – User Manual – v1.0