3.2.3 CATENA GUI Interface
CATENA GUI interface allows the user to easily access the system monitoring via a powerful web based graphic
display.
In addition to the touch-screen display the user can also access to the same GUI using an Ethernet port present on the
T4S or CATENA.
3.2.3.1 Software Overview
The software embedded in T4S and CATENA allows complete system supervision through “touchscreen display” or via
web browser, and provides functionalities such as:
•
System setting and configuration (password protected).
•
System status and information display.
•
System alarms and events log file.
•
System self-maintenance (battery test, battery boost charge,….).
3.2.3.2 CATENA comes in two versions:
•
Rack mounted where the unit takes 3U inside the cabinet flush mounted.
•
Door or Panel mounted where the unit is fixed to the door or panel.
Catena - Rack Mounting Version
Remark:
Reset will only reset the Catena, not the T4S and will have no effect on the system.
Power supply and connectivity are provided on the back of the unit:
12
– Flexa 200 - 400/400 – User Manual – v1.0
Introduction
Summary of Contents for FLEXA 200 400/400
Page 17: ...17 Flexa 200 400 400 User Manual v1 0 Hardware setup Page 2...
Page 69: ......
