CDVI AIOM, Installation Manual

Page: 18 / 24

18
cdvigroup.com
EN
AIOM
10-Input/10-Output Module
INSTALLATION MANUAL
EN
AIOM
10-Input/10-Output Module
INSTALLATION MANUAL
LED Indicators
The ATRIUM 10-Input/10-Output Module has several status LEDs that are very useful to diagnose problems
when using or installing the ATRIUM system. Refer to the following picture for the emplacement of those LEDs
on the ATRIUM 10-Input/10-Output Module. All LEDs are explained in the following pages.
INPUTS INPUTS OUTPUTS OUTPUTS
TMP/SMOKE
LOCAL BUS
AIOM
Input / Output Module
2
3
1
1
GLOBAL STAT Flash once per second: Firmware is operating normally.
Flash rapidly: Firmware is upgrading.
Inputs
IN1 to IN10
Green LED: Input breached
Off LED: Input normal (OK)
Green LED flashing: Input in trouble (wire cut or wire short).
2
OUTPUTS OUT1 to OUT10 Green LED: Output activated.
Off LED: Output not activated.
3
LOCAL BUS RX Green LED flashing: Data received on local bus.
TX Green LED flashing: Data transmitted on local bus.