background image

20

cdvigroup.com

EN

AIOM

10-Input/10-Output Module

  INSTALLATION MANUAL

EN

AIOM

10-Input/10-Output Module

  INSTALLATION MANUAL

7] Warranty  -  Terms & Conditions

The “5 Year Warranty” is offered by CDVI exclusively for CDVI products featuring the logo “5 Year Warranty”, 

and supplied by authorized CDVI dealers participating in the offer. You can obtain the address of the local 

authorized dealer participating in the offer by contacting CDVI or a local CDVI subsidiary. The “5 Year Warranty” 

is only applicable to hidden defects detected during the lifetime of the product, as defined by the CDVI Group (5 

years or 200 000 operations - whichever of the two expires first).
The “5 Year Warranty” conditions shall not modify the sales conditions between CDVI and its customers.

DURATION OF THE OFFER:

• This offer is valid from July 1st 2010; CDVI reserves the right to terminate this offer without prior 

notice .

• However, any product already registered up to the date of withdrawal of the offer will remain 

eligible for the “5 Year Warranty”.

• The warranty applies only to the available products mentioned in the above statement.

CONDITIONS :

• Hidden defects are guaranteed for an unlimited shelf life (period of time before use).
• To be eligible for the “5 Year Warranty”, the product must be registered at CDVI within one month 

of its delivery to the end user, by completing in and returning back the “warranty” form by fax, 

email or post to the local CDVI subsidiary. This information may also be registered on line at www.

cdvigroup.com.

• Only the issue of the “5 Year Warranty” certificate by CDVI can confirm product registration; CDVI 

may not be held responsible in the event of loss or non-presentation of the form.

• The “5 Year Warranty” only applies to products installed by a skilled and experienced personal 

with the necessary trade qualifications to install according to the highest standards, respecting 

the standards, instructions and guidelines defined by CDVI and according to the maximum 

recommended specifications.

• To enable CDVI to determine whether a product is eligible to claim for the “5 Year Warranty”, 

after prior issue of a return of materials authorization number (RMA) by CDVI, the customer must 

return the product and all of its accessories in the original packaging with a copy of its invoice. The 

transport fees shall be paid by the customer and the package must be returned to CDVI or to a 

CDVI authorized repair centre .

• Eligibility for the “5 Year Warranty” cover must be confirmed by CDVI.
• The “5 Year Warranty” only covers the replacement or repair of the parts acknowledged as faulty by 

CDVI .

• CDVI reserves the right to respect its obligation by replacing the product or the parts acknowledged 

as faulty by a standard part replacement or by a product or new parts, or by an updated or 

improved version of the product with identical or similar functionalities.

• In respect of the applicable law, CDVI cannot be held responsible for material or immaterial 

damages caused to goods or to third parties and as a direct or indirect result of the installation, 

utilization, product faults or poor functioning of a device.

• The “5 Year Warranty” is non-assignable and non-transferrable; only the person who registered the 

aforementioned warranty may benefit from the warranty.

• The “5 Year Warranty” is limited to the eligible product and is strictly limited to the conditions in 

effect on the date of purchase by the customer.

Summary of Contents for AIOM

























Reviews: