CDA SC 310 Series, Manual For Installation, Use And Maintenance, Page: 7 / 36

7
How to Use the Oven
IMPORTANT NOTES:
−
Do not use the appliance in case of power failure or if the cooling fan motor is damaged.
The appliance may overheat and get damaged due to the non-operation of the cooling fan
motor.
−
In case of failure of the cooling fan motor du-
ring the operation of the gas oven or grill, the
oven or grill burner is turned off automatically
after about 20 minutes.
In that case do not use the appliance and con-
tact the after-sales service.
−
When the cooling fan motor is operating cor-
rectly there is an air flow in the top area of the
appliance (fig. 2).
Oven Burner
The gas flow to the burner is regulated by a thermostat which allow to maintain the oven temperature
constant.
The control of the temperature is assured by a thermostatic probe positioned inside the oven.
The probe must be always kept in its housing, in a clean condition, as an incorrect position or en-
crustment may cause an alteration in the control of the temperature.
Moreover, the thermostat is fitted with a safety valve which automatically shuts off the gas supply when
the flame goes out.
Thermostat
The numbers printed on the control panel (fig. 3) indicate the
increasing oven temperature value.
To regulate the temperature, set the knob to the chosen number.
The symbol close to the maximum position indicates that the
electric ignition is incorporated into the knob (activated by the
knob itself).
Fig. 3
Fig. 2