CDA SC 310 Series, Manual For Installation, Use And Maintenance, Page: 19 / 36

19
After Cleaning, Replace the Inner Glass
Pane
When replacing the inner glass pane, make sure
that:
− You replace the pane correctly, as shown. The
pane must be in the position described below
in order to fit into the door and to ensure that
the oven operates safely and correctly.
− You take extra care not to bump the edges of
the glass against any object or surface.
− You do not force the pane into place. If you are
experiencing difficulties replacing the pane,
remove it and start the process again from the
beginning. If this still does not help, call Cu-
stomer Care.
To reassemble the inner pane of the oven door ope-
rate as follows:
1.
Make sure the door is locked open (see fig. 24).
2.
Replace the inner pane:
− Check that the four rubber pads are in place
(
D
in fig. 26).
IMPORTANT: It is advisable, while refitting the
glass, to keep pressed in position the four rub-
ber pads
D
, by a finger, to avoid breakage or
slippage of the rubber pads themselves (Fig.
27).
− Check that you are holding the pane the cor-
rect way. You should be able to read the wor-
ding on it as it faces you.
− Insert the pane in the left
E
and right
F
slide
guides (fig. 27), and gently slide it to the retai-
ners H (Fig. 28).
− Unlock the oven door by opening it comple-
tely and closing the lever A on the left and
right hinges (fig. 29).
H
D
F
E
A
Fig. 29
Fig. 28
Fig. 26
Fig. 27