23
Fixing the Oven
Introduce the oven into the furniture opening and
fix it with 4 screws (not supplied) as figure 31.
It is essential that the oven rests on a surface which
will support its weight, as the screw fixing is only
complementary.
Adjust the hinges of furniture doors adjacent to the
oven to allow a 4-5 mm gap between the furniture
door and the oven frame.
IMPORTANT:
To avoid damage to the lower trim please note
the following instructions.
The lower trim is designed to allow for good air cir-
culation and the correct opening of the oven door.
To ensure the trim is not damaged due to the ap-
pliance being placed on the floor, the appliance
should be suitably supported as in illustration here
below.
After installation the appliance door should be
slowly opened to ensure no damage has occurred.
No responsibility for lower trim damage will be
accepted if these instructions have not been fol-
lowed.
Fig. 31
Fig. 32
Oven
door
Lower trim
Air flow
Summary of Contents for SC 310 Series
Page 35: ...35...