30
Grill Burner
−
Unscrew and remove the burner securing screw “
A
” (fig. 40).
−
Withdraw the burner as shown in figure 41. Take care not to damage the safety valve probe and
the electric ignition electrode.
−
Using a 7 mm box spanner, unscrew the injector (indicated by the arrow in fig. 41) and replace it
with a new one selected in accordance with the “Table for the choice of the injectors”.
−
Regulate the air supply to the grill burner as indicated in the section “Regulation of air supply to
oven and grill burners”; then replace the burner repeating the above steps in reverse order.
IMPORTANT: Check the correct operation of the safety valve and the ignition electrode.
Fig. 40
Fig. 41
A
Summary of Contents for SC 310 Series
Page 35: ...35...