CD Automation REVEX 1Ph 30A, User Manual

Page: 58 / 60

58
REVEX
1PH from 30A to 40A
User’s manual
RS485 Serial port
M3 Terminal Description
3 RS485 A+
4 RS485 B-
The serial communication port RS485 is available on the Command Terminals.
On this port may be done a network up to 127 REVEX.
16
SYNC
1 2 3 4 5 6 7
TOP VIEW
M3
Note (1): Not available with Modbus TCP Field Bus Communication (T-C-P on digit 8-9-10)
Note (2): It’s possible to manage from 1 to 14 zones with basic read and write configuration (see the Manual). Code “00” is used for different configurations.
Field Bus or Communication
8 9 10
description code note
N° 1 Modbus TCP + N° 1 Modbus RTU slave T C P
N° 1 ProfiNet IO + N° 1 Modbus RTU slave P N T
N° 1 ProfiBus DP + N° 1 Modbus RTU slave P D P
N° 1 Ethernet IP + N° 1 Modbus RTU slave E I P
Secondary Communication Port
11
description code note
None 0
Modbus TCP 1 1
Configuration 12 13 14
description code note
REVEX 1-2-3PH R V X
N° zones
15 16
description code note
Not configured 0 0 2
1 zone 0 1
2 zones 0 2
3 zones 0 3
4 zones 0 4
5 zones 0 5
6 zones 0 6
7 zones 0 7
8 zones 0 8
9 zones 0 9
10 zones 1 0
11 zones 1 1
12 zones 1 2
13 zones 1 3
14 zones 1 4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ORDER CODE T U - R S 4 8 5 - _ _ _ _ _ _ _ _ _
16.1 FIELD BUS Module
Technical Specification
• Up to n°14 REVEX can be connected for each terminal module
• Secondary communication port to connect REVO HMI
• Main process variable available
• 24Vdc Power Supply
• Simplified configuration
Addendum Manual available here:
https://www.cdautomation.com/download/cd-automation/revex-comm/manuals/ENG/REVEX_14RX_profinet.pdf
Warning: It is not possible to remove the M3 connector when
the unit is powered. Remove the AUX 24Vdc power supply
before extracting the M3 connector.
Extracting the M3 connector with the AUX 24Vdc power supply
connected to the M3 terminal could damage the unit