8
ADDITIONAL WIRELESS SENSOR(S) (OPTIONAL)
The console can support up to 7 wireless sensors.
1. In the new wireless sensor, slide the Channel switch to a new CH number
2. Press the
[ RESET ]
key on the new sensor.
3. At the back of the console, press the
[ SENSOR / WI-FI ]
key enter sensor synchronization
mode
4. Wait for the new sensor(s) to pair up with the console. (about 1 minute)
5. Once the new sensor(s) are connected to the console successfully, their temperature and
humidity will be shown accordingly.
NOTE:
- Channel number of the sensor must not be duplicated among the sensors. Please refer to “
INSTALL
Wireless thermo-hygro SENSOR
” for details
-
This console can support different type of additional wireless sensor(s), e.g. soil moisture. If you
would like to pair up additional sensors, please check with your retailer for more detail.
SENSOR(S) RESYNCHRONIZATION
Press the
[ SENSOR / WI-FI ]
key once for the console to enter sensor Synchronization mode
(channel number blinking), and the console will re-register all the sensors that have already
been paired to it before.
REMOVE WIRELESS SENSOR
User may manually delete any sensor from the console.
1. Press the
[ CHANNEL ]
key until the console shows the display of the selected sensor.
2. Press and hold
[ REFRESH ]
key for 10 seconds, until its readings are reset " -- , -
°C -- % "
is shown.
SMART LIFE APP
ACCOUNT REGISTRATION
The console works with Smart Life App for Android and iOS smart phone.
1. Scan the QR code to go to the Smart Life download page
2. Download Smart Life from Google Play or Apple App store.
3. Install the Smart Life App.
4. Follow the instruction to create your own account using phone
number or email.
5. Once the account registration is completed, the Home Screen
will be shown.
Smart Life for
Andriod /IPhone
NOTE:
- There is no Registration code needed if email method is chosen.
- The App may be subject to change without notice.
- You may be prompted to allow the App to have access to your location. This will allow the app to give you
general weather information in your area. The app will still work if you don' t allow access to that.
CONNECT WEATHER STATION TO WIFI NETWORK
1. Press and hold the
[ SENSOR / WI-FI ]
key for 6 seconds to enter AP mode manually,
indicated by blinking AP and
. When the console is power up for the first time, the console
will automatically enter and stay at AP mode.
2. Open Smart Life App and follow the in-app instructions to connect weather station to your
Wi-Fi network.
