CBS ArcSafe RRS-3 WL, Installation And Operation Manual

Page: 5 / 16

RRS-3 WL
Installation and Operation
3
4. Place the RRS-3 on the breaker faceplate, and ensure that the locators around the RRS-3 are flush
with the upper edge and sides of the breaker, as shown below.
5. Secure the RRS-3 to the breaker by turning the handles of the twist magnets 180 degrees clockwise.
6. Extract the racking handle from the WL breaker, and pull it out fully until it clicks and locks into place.
Ensure that the handle extension is pulled fully out as shown below.
7. Pull upwards on the black locking pin until the slide assembly is released. When released, the slide
assembly will gently slide forward on its own.