CBS ArcSafe RRS-3 WL, Installation And Operation Manual

Page: 10 / 16

RRS-3 WL
Installation and Operation
8
3.2 Actuator Location Adjustment
In order to adjust the horizontal and vertical location of the actuator and slide assembly on the RRS-3,
several adjustment points are given on the frame. The RRS-3 comes pre-adjusted from the factory for it’s
breaker, so these adjustments should not normally need to be made.
To adjust the vertical positioning of the slide assembly:
1. Loosen the four bolts on the side L-brackets as indicated below.
2. Next, move the assembly up or down as required to align the RRS-3 racking adapter with the breaker
racking handle.
3. Re-tighten the bolts loosened previously.