RRS-3 WL
Installation and Operation
2
1
Installation
D
ANGER
!
Ensure that the equipment to be remotely operated matches the equipment shown and de-
scribed on the cover page. If the equipment does not match, please contact CBS ArcSafe® for
more information regarding remote operating applications for the equipment in question.
A
TTENTION
!
The location of certain items such as mimic bus, stickers, and/or placards may interfere with
the installation of the remote operating equipment. These items may need to be removed or
repositioned for proper installation.
1.
Ensure that the breaker is free from any obstruction that may interfere with the proper installation of
the RRS-3.
2.
Ensure that the torque limiter on the RRS-3 is set correctly to allow proper operation. See section 3.1
Torque Limiter in this manual for more details
3.
Retract the slide assembly fully back by placing the RRS-3 face-down, gripping the handles mounted
to each side of the motor, and pulling up until the black locking pin clicks into place.
Summary of Contents for RRS-3 WL
Page 12: ......
Page 13: ...RRS 3 WL Installation and Operation 11 Notes...
Page 14: ...RRS 3 WL Installation and Operation 12...
Page 15: ......