The interface:
The LUMIX is fully programmed using its touch screen. Each screen
displays different controls that can be operated by a simple touch of
the finger, such as buttons or progress bars. The touch screen of the
LUMIX detects only one touch at a time. The interface is very intuitive
and easy to master.
Lights:
The LUMIX is specially designed to work with dual color LED lights. It
can adjust each color independently, and thus create any light
intensity of any color that lies within the limits of the lights used. It
can also be used in monochrome mode with standard light fixtures. In
that case, only the intensity in Lux will be used and both outputs will
operate at the same level at all time, except in manual mode.
Light Sensor:
The light sensor is able to measure the light intensity as well as the
color of the light that shines on it with great precision. Keep in mind
that emitted light as well as reflected light will be detected by the
sensor. Avoid mounting the sensor near brightly colored objects.
Alarm Relay:
The alarm relay detects a malfunction of the light sensor that could
prevent the LUMIX from functioning properly. A jumper on the
electronic board allows to choose a NO (normally open) or NC
(normally closed) contact. When the sensor is operating normally, the
relay is in its “normal” state: the NO contact is open and the NC
contact is closed. When the LUMIX detects that the sensor is not
working, the state of the relay is reversed.
How the LUMIX works
