SAVE / LOAD DATA
Hold the left arrow to load the data into the calendar.
Hold the right arrow to save the data to the disk (non volatile memory).
As a precaution, you must hold the button until the progress bar
is complete. This will prevent accidental operation from a single touch.
Press the checkmark to go back to the previous menu.
The schedule memory is powered by the battery. If you remove the battery, all
data in the system memory will be reset to the default values,
including schedule data as well as all system configurations.
You can save all this data to the non-volatile memory of the DTD-T.
When all your configurations are done and your schedule is programmed,
save a backup of the data to the non-volatile memory to keep it indefinitely.
If you change the battery or make a mistake when changing your battery
time, you can always load what you have backed up.
Note: You must unlock the system before saving or loading
the data.
Save / Load Data
