background image

Warranty

CB Tech Warranty

: CB Tech warrants to the original retail customer its DWS and 

components to be free of defects in material and workmanship for use under 
normal care.

CB Tech Solid Carbon Block Filters are warranted for defects in material and 
workmanship  for  use  under  normal  care.  The  capacity  of  the  filter  cartridge 
depends upon the amount of impurities in the water to be processed.

Except as otherwise expressly provided above, CB Tech makes no warranties, 
express or implied, arising by law or otherwise, including without limitation the 
implied  warranties  of  merchantability  and  fitness  for  a  particular  purpose,  to 
any person. This limited warranted may not be altered, varied, or extended 
except by a written instrument executed by CB Tech. The remedy of repair or 
replacement as provided under this limited warranty is exclusive. In no event 
shall CB Tech be liable for any consequential or incidental damages to any 
person whether occasioned by negligence of the manufacturer, including 
without limitation damages of loss of use, cost of substitution, property damage, 
or other monetary loss.

Warranty is valid only if the DWS is operated within conditions listed herein. The 
warranty begins from the date of purchase.

21

Prepare Your Drinking 

Water System for Use

Summary of Contents for CB-As

























Reviews: