CB Svendsen FA-20, Manual

Page: 23 / 26

23
SMS for selecting serial driver :
NNNND07
activates the meter driver Kamstrup KMX.
NNNND18 activates the meter driver Kamstrup M66C with forward / reversed energy.
NNNND20 activates the meter driver Flonidan DC22.
NNNND24 activates the meter driver Flonidan Gallus.
NNNND25 activates the meter driver Kamstrup Unigas.
NNNND28 activates the meter driver Kamstrup real Multical 601protokol.
NNNND29 activates the meter driver Max M-bus (M-bus meters). Default ex. delivery
SMS for remote activation of keystroke:
If you need to perform a remote keystroke on the FA-20 for example for testing the readout of
all serial meters, then the following SMS command can be used:
NNNNTGO .
SMS for extended Service SMS with more meter data:
If you need a service SMS with energy, volume and meter SN for serial meters connected to
M1, M2 and MULTI, then the following SMS command is used:
NNNNMET:
FA-20: 20103581
FA-20’s serial no.
FeltS: -077 dBm
Field strength in dBm: OK signal from -50 to -90dBm.
Firmw: 0112 D: 28
FA-20 SW version. D: 28 mean that chosen driver is no. 28.
Mbus1: 00138859
Serial no. read by meter connected to M1.
Energy: 0
Energy counter stand for M1.
Volume: 839
Volume counter stand for M1.
Mbus2: 90012312
Serial no. read from meter connected to M2.
Energy: 3552.25
Energy counter stand for M2.
Volume: 88243.88
Volume counter stand for M2.
Multi: 30904878
Serial no. read from meter connected to MULTI.
Energy: 271809
Energy counter stand for MULTI.
Volume: 2.07
Volume counter stand for MULTI.
SMS for activation and deactivation of relay output in the FA-20:
If the FA-20 is mounted with operations module type 1 and 2 the following SMS command can
be used to activate/ deactivate the relay outputs:
NNNNR1C
Clear relay no. 1 (=
deactivates relay no. 1
)
NNNNR1S Set relay no. 1 (= activates relay no. 1 )
NNNNR2C Clear relay no. 2 (= deactivates relay no. 2 )
NNNNR2S Set relay no. 2 (= activates relay no. 2 )
SMS for activation and deactivation for permanent M-bus voltage on M1/M2:
NNNNM1VS
Set permanent M-bus voltage on M1
NNNNM1VC Clear permanent M-bus voltage on M1 (default)
NNNNM2VS Set permanent M-bus voltage on M2
NNNNM2VC Clear permanent M-bus voltage on M2 (default)
Note: The main station is able to change the password ( NNNN ) to 4 other characters.
If you have chosen another password than NNNN by using the main station, then it is of
course only the new password which gives access to the SMS functions – the password can
only be change via the main station and not locally on site.