Cattron-Theimeg i-Key, Operation & Maintenance Manual

Page: 38 / 90

Section 3, Page 8

01/2001, CATTRON - THEIMEG
TM
Operating Procedure – PS Controller
, continued.
WARNINGS:
MORE THAN ONE REMOTE CONTROL SYSTEM MAY BE USED AT,
AROUND, OR NEARBY YOUR OPERATING FACILITY. THEREFORE,
BEFORE INSERTING AN ‘i-Key’ INTO A PENDANT CONTROLLER, YOU
MUST INSURE THE CORRECT CODED ‘i-Key’ IS SELECTED FOR THE
DESIRED EQUIPMENT TO BE OPERATED.
IF THE WRONG ‘i-Key’ IS INSERTED INTO A PSAT SERIES
CONTROLLER, OR IF THE WRONG ADDRESS AND FREQUENCY IS
PROGRAMMED INTO A PSEZ OR PSCS SERIES CONTROLLER, OTHER
EQUIPMENT LOCATED AT, AROUND, OR NEARBY YOUR FACILITY
MAY BECOME OPERATIONAL.
FAILURE TO COMPLY WITH THE ABOVE WARNINGS MAY RESULT IN
OPERATION OF UNDESIRED EQUIPMENT WHICH IN TURN COULD
RESULT IN SERIOUS INJURY OR DEATH TO PERSONNEL AND DAMAGE
TO EQUIPMENT.
WARNING:
CATTRON-THEIMEG
™
PSEZ AND PSCS PORTABLE REMOTE CONTROL
(PRC) SYSTEMS ARE NOT DESIGNED TO INTERFACE DIRECTLY TO
SAFETY CRITICAL BI-STABLE MAINTAINED FUNCTIONS (i.e., electro-
magnet circuits, vacuum circuits, grab, pump motors, fire suppression etc.).
CONTACT CATTRON-THEIMEG
™
FACTORY FOR INFORMATION
REGARDING PROPER INTERFACE TO SAFETY CRITICAL BI-STABLE
MAINTAINED FUNCTIONS.
SHOULD CATTRON-THEIMEG
™
PSCS AND PSEZ PORTABLE REMOTE
CONTROL SYSTEMS BE INADVERTENTLY CONFIGURED TO
INTERFACE DIRECTLY WITH SAFETY CRITICAL BI-STABLE
MAINTAINED FUNCTIONS AT YOUR OPERATING FACILITY, DAMAGE
TO EQUIPMENT, SERIOUS INJURY, OR DEATH TO PERSONNEL MAY
RESULT.
IT MUST BE FULLY UNDERSTOOD THAT CATTRON-THEIMEG
™
WILL
NOT BE HELD LIABLE FOR PERSONAL INJURY, DEATH, EQUIPMENT
OR PROPERTY DAMAGE WHICH MAY ARISE FROM IMPROPER
CONFIGURATION OF YOUR PORTABLE REMOTE CONTROL SYSTEM.