to clean thoroughly, before refitting everything, beating the balls again if necessary
POS. 5,7 - A06065
POS. 5,7 - A06065
; bleed off all
air, then put the jack back in normal position and re-open the cock
POS. 10 - A06067
POS. 10 - A06067
.
HYDRAULIC FLUID LEAKS
HYDRAULIC FLUID LEAKS
- Silencer is leaking fluid
POS. 2 A06065
POS. 2 A06065
: The pumping element
POS. 25 - A06065
POS. 25 - A06065
or gaskets
POS. 16,17 -
POS. 16,17 -
A06065
A06065
could be worn and must be replaced.
- Vacuum pump is leaking fluid
POS. 31 - A06065
POS. 31 - A06065
: Check the fluid level; it might be too high. If the jack has been
turned over or tipped up, the leak will stop after a short time.
THE PIST
THE PISTONS F
ONS FAIL T
AIL TO GO BACK IN COMPLETEL
O GO BACK IN COMPLETELY EVEN WITH THE LEVER IN THE
Y EVEN WITH THE LEVER IN THE
LOWERED POSITION
LOWERED POSITION
- Check the vacuum pump
POS. 31 - A06065
POS. 31 - A06065
: remove, clean and refit it. Remove and clean the head
POS. 22 -
POS. 22 -
A06065
A06065
THE PIST
THE PISTONS RAISE VER
ONS RAISE VERY SLOWL
Y SLOWLY
Y
- Check that the cock
POS. 10 - A06067
POS. 10 - A06067
located between the tank and the motor pump is open.
EN
EN
16
Summary of Contents for YAK 330/S
