Cattani TURBO SMART HP, Instruction Manual

Page: 17 / 44

17
cod: ed. 09-2021
EN
G
LI
SH
This menu can be accessed without a password and it is used to configure the
Wi-Fi parameters.
WI FI SETTINGS
This menu is not accessible, exclusively reserved to Cattani company.
FACTORY SETTINGS RESTRICTED ACCESS
Drive Status is the only menu that can be viewed without a Password.
A password is required to access the User Parameters and System Parameters
Setup menus.
The password for the “User Parameters” menu is “0000123000”.
The password for the “System Parameters Setup” menu is “0000456000”.
KEYING IN AND ENTERING THE PASSWORD
From the “CATTANI S.p.A.” menu, press the arrow, then the arrow , the
display will show the “Access Password” menu 0000000000
Press Enter , the cursor will appear on 0, to the right.
Press and move the cursor to the sixth 0.
By pressing 1 will appear.
Press move to the 0 next to it and with select 2.
Press move to the 0 next to it and with select 3.
I
SYSTEM PARAMETERS SETUP
To access, enter the password “0000456000”.
This is where you can adjust switch-off delay and other technical parameters.