Cattani TURBO SMART HP, Instruction Manual

Page: 27 / 44

27
cod: ed. 09-2021
EN
G
LI
SH
Alarm codes Description Solution
00 0 Microcontroller memory alarm Contact technician
I00 32 Microcontroller memory alarm Contact technician
I01 33
Short circuit caused by one of the two
motors
Check cause of short circuit and remove
it
I02 34 Short circuit before motor control
Contact the technician (board probably
damaged)
I03 35 Failed capacitor charging Contact technician (replace the board)
I04 36 Temperature threshold exceeded Ventilate plant room
I05 37 Blower current limit exceeded
Check efficiency of blower (shutdown or
excessive resistance)
I07 39
Maximum voltage on capacitors
exceeded
Check mains voltage max. 260V
S08 40 Centrifuge short circuit Remove short circuit
S09 41
Short circuit of card in centrifuge
outlet
Replace the board
S10 42
Instantaneous centrifuge current limit
exceeded
Eliminate siphons in pipes or check
efficiency of the centrifuge (shutdown or
excessive resistance)
S11 43
Delayed centrifuge current limit
exceeded
Eliminate siphons in pipes or check
efficiency of centrifuge (shutdown or
excessive resistance)
I13 45 Amalgam reader disconnected Connect amalgam sensor
I14 46 95% of amalgam level exceeded Replace amalgam container asap
I15 47 100% of amalgam level exceeded Replace amalgam container
I16 48 Vacuum sensor tube disconnected Connect vacuum tube to centrifuge
I17 49 Open thermal pad (Centr. Sep.) Restore temperature in plant room
ALARMS DESCRIPTION