Catler ES 8013, Instructions For Use Manual, Page: 15 / 48

15
OPERATING YOUR CATLER PRODUCT
BEFORE FIRST USE
Machine Preparation
Remove and discard all labeling and
packaging materials attached to your
espresso machine. Ensure you have removed
all parts and accessories before discarding
the packaging.
Clean parts and accessories (water tank,
portafi lter, fi lter baskets and jug) using warm
water and a gentle dish washing liquid and
rinse well. Wipe the outer housing, bean
hopper and drip tray with a soft damp cloth
and dry thoroughly. Do not immerse the
outer housing, power cord or power plug
in water or any other liquid.
The water fi lter located inside the water tank
will need to be removed before washing the
water tank.
CONDITIONING THE WATER FILTER
• Remove fi lter from the plastic bag and
soak in a cup of water for 5 minutes.
• Rinse fi lter under cold running water.
• Wash the stainless steel mesh in the
plastic fi lter compartment with cold
water.
• Insert the fi lter into the fi lter holder.
• Set the dial date 2 months ahead.
• To install fi lter, push down to lock into
place.
• Slide the water tank into position and
lock into place.
FIRST USE
Initial Start Up
• Fill tank with water
• Press POWER button
• A pumping sound will be heard.
The machine will reach operating
temperature and go into Standb y mode.
FLUSHING THE MACHINE
It is recommended to complete a water
fl ushing operation, without ground coff ee,
to ensure the machine has been conditioned.
When the machine has reached STANDBY
mode, run the following 2 steps.
•
Press the 2 CUP button to run hot water
through the group head for 30 seconds.
• Activate steam for 10 seconds.
• Repeat this cycle until the water tank
is empty.
NOTE
Do not clean any of the parts
or accessories in the dishwasher.
OPERATING YOUR CATLER PRODUCT