ENGLISH JULY 2020 - IND B
Page
50
of
162
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail: [email protected] - Tel +33 (0)4 68 80 13 13 - Fax +33 (0)4 68 80 13 19
11. STEERING SYSTEM
(Plans on pages N°116 to N°117)
The steering system is an essential element in the safety and comfort of your vessel.
11.1 Steering wheel
The steering wheel (Figure 11) controls the rudders via a hydraulic system: the two rudders are linked
together with a bar which crosses the aft beam.
CAUTION
-
The hydraulic circuit requires periodic checks.
-
Maintain the oil level in the pump at the helm station.
-
Bleed the system if necessary.
-
Use DEXRON II hydraulic oil
-
Periodically check the amount of play in the different parts of the system (rudder post / bearings)
-
Periodically grease the system.
-
Inspect the hydraulic ram (Port engine compartment) and the pump (located at the helm station), as well
as the hydraulic unions to check there are no leaks and there is no evidence of any wear.
The steering stops are bolted to a shelf secured to the main structure of the boat.
In case of doubt or problems, consult your dealer.
In case of damage to either of the two rudders:
-
Open the bypass valve located close to the hydraulic ram in the port engine compartment.
-
Install the emergency tiller. See Chapter 11.2
Figure 10
Oil filler neck (beneath the compass)
