ENGLISH JULY 2020 - IND B
Page
22
of
162
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail: [email protected] - Tel +33 (0)4 68 80 13 13 - Fax +33 (0)4 68 80 13 19
CAUTION
-
When the vessel is left unattended alongside a quay, put the circuit breaker in the open position.
DANGER
If your boat is delivered without shore power lead and without a male shore power socket, the cable
you use must be suitable for outdoor use. It must be of a suitable section for its length and for the
rating of the main circuit breaker (See wiring diagram). The plug must be matched to the female
socket on the quay (Check with a professional if necessary). It must correspond as closely as possible
to type IP 67 / IEC529.
To minimize the risk of electric shock and fire:
-
Switch off the shore power on board before plugging in or unplugging the shore power
cable.
-
Plug in the shore power lead on the boat before plugging it in to the shore power socket on
the quay.
-
Unplug the shore power lead from the socket on the quay before unplugging it on board
the boat.
-
Ensure that you have closed the cover on the shore power socket on the quay.
Never:
-
Swim near a boat connected to shore power: there is a risk of electrocution!
-
Do not let the end of the shore power cable fall in the water.
-
Do not modify the connections of the shore power cable: only use compatible plugs
.
