ENGLISH JULY 2020 - IND B
Page
33
of
162
CATANA SAS - Zone Technique du Port - 66140 CANET EN ROUSSILLON (FRANCE)
e - mail: [email protected] - Tel +33 (0)4 68 80 13 13 - Fax +33 (0)4 68 80 13 19
6.4. Operating the sea toilets
-
Check the level in the holding tank before using the toilets
-
Open the seawater inlet valve.
-
Move the lever to the “flush” position.
-
Pump the handle.
-
To empty the bowl and avoid any ingress of water when heeled, move the lever to the “dry bowl”
position.
-
Pump the handle until the bowl is dry.
-
Repeat this operation of flushing / emptying the bowl as many times as necessary to ensure that
the hoses are completely empty.
-
When the toilets are not in use, put the lever in the “LOCK” position
.
-
Close the valves after use, as the toilet is located just above the waterline.
Regularly change the seals and filter of the seatoilet.
Flush position
Dry bowl position
“LOCK”
Position
Figure 7
Selector
