10
S
TORAGE
S
ERVER
U
SER
’
S
G
UIDE
TCP/IP
Time Zone
Select your time zone from the list.
Date/Time
Enter the local date (mm/dd/yyyy format) and time.
Obtain an IP
Address
automatically
(DHCP Client)
If you have a DHCP or BootP server on your LAN,
you can enable this setting. The Storage Server will
then obtain its IP Address from the DHCP or Bootp
server. However, because this is a Server, it is
preferable to use a
fixed, or static IP Address
.
If your LAN does not have a DHCP server, then you
must select Fixed IP Address.
Fixed IP Address
Select this option to enter an IP Address. This option
is required if you wish to enable your Storage
Server’s DHCP Server function.
N
OTE
:
The Storage Server must have a static
IP address
to be used as a server for
FaxPress or OfficeDirect Messaging
Server.
IP Address
Enter a free IP Address from the address range used
by PCs on your LAN. The default Storage Server
value is 192.168.0.2
Network Mask
Use the same value as PCs on your LAN. The default
Storage Server value is 255.255.255.0
Gateway
Use the same value as PCs on your LAN. If you don't
have a router or Internet Gateway, leave this at the
default value (blank).
Enable DHCP
Server
If checked, the Storage Server will provide an IP
Address and related data to PCs on request. PCs will
only make DHCP client requests if they are properly
configured to act as DHCP clients. (See
Windows
Client Setup
and
Mac Client Setup
for details.)
Start IP Address
The first value for the range of IP Addresses to be
allocated by the DHCP Server.
Finish IP Address
The last value for the range of IP Addresses to be
allocated by the DHCP Server.
Make the range is large enough for the number of
DHCP clients making DHCP requests.
