U
SING
THE
S
TORAGE
S
ERVER
'
S
S
TORAGE
W
INDOWS
C
LIENT
S
ETUP
29
U
SING
THE
S
TORAGE
S
ERVER
'
S
S
TORAGE
To use the Storage Server's storage, you must "Map" a drive letter
to each folder on the Storage Server folder which you wish to
access. The "Drive" will then be available to all Windows
programs. To enable the Storage Server’s storage:
1.
Double-click the
Network Neighborhood
icon on the desktop.
2.
Locate the Storage Server, as shown below. If it is not listed,
double-click
Entire Network
. Then, double-click the
Workgroup
that the Storage Server is in. (By default, the
Storage Server is in
Workgroup
.)
3.
Double-click the Storage Server icon
4.
Right-click a folder (directory) to which you have access, and
select
Map Network Drive
, as shown below
.
5.
Select a drive letter for this folder, and check the
Reconnect at
Logon
checkbox. (If this is not done, the mapping will be lost
when you shut down your PC.) Click OK.
