8
S
TORAGE
S
ERVER
U
SER
’
S
G
UIDE
be ON. Then, during the boot process, the
Ready, Alert
and
Disk Full
LEDs will be ON. Once the boot process is finished,
the
Ready
LED should be ON and the
Alert
LED should be
OFF. If the
Alert
LED stays ON, there is a hardware problem.
Repeated beeps also indicate a failure to boot correctly.
N
OTE
:
If the Storage Server is powered on and in
Ready
mode
DO NOT pull
the power adapter without first shutting down the Storage Server
.
Disconnecting power prior to shutdown causes a 15 to 20 minute check
disk process. Please see page 30 for proper shutdown procedures.
S
TORAGE
S
ERVER
S
ETUP
U
SING
W
INDOWS
For basic operation, only the following setup is required. For
further Administrative options, see
Chapter 3 - Administration
.
Software Installation
1.
Place the Storage Server setup CD-ROM in the drive of your
Windows system. If setup does not start automatically, run
SETUP.EXE in the root directory.
2.
Follow the prompts to install the
Storage Server Utility.
Using the Storage Server Utility
1.
From the
Start Menu,
select
Programs>OfficeDirect
Storage
Server> Storage Server Utility
.
Storage Server Setup Utility
