Maintenance, Errors, Repair
REFLECTA/1
Page D2
Mounting & Operations Manual
Cleaning of Reflection Optics
Use only a soft and non scatching cloth.
Not in every case all below mentioned positions are equipped with lenses.
Details for cleaning of lenses and mirrors inside the horzontal by-pass channel can be found in the relevant
instructions attached separtely.
Possible Lens Positions
1.
2.
3.
4.
5.
6. 6.
1.
2.
3.
1. Upper part of the binnacle colum. Accessible by removing of compass.
2. Bottom side of the binnacle colum. Accessible by removing the relevant cover, ref. to chapter „Compass
Binnacle, Outline“.
3. Inside Lead-in tube (right) or mirror tube (left). If lead-in tube or reflection tube are outside the wheelhouse
they have to be protected by an additional channel. This channel should have a removable flap at the
position of the lens to allow access to the lens.
4. Inside horizontal by-pass channel. If the by-pass channnel is above the ceiling there must be a removable
flap in the ceiling to allow access to the lens.
5. Same as 4.
6. By-pass mirrors. Refer to special instructions of by-pass.
Alterations / Errors reserved
Cassens & Plath GmbH, Kompasshaus, Am Lunedeich 131, 27572 Bremerhaven, Germany, tel. +49 471 4839990 fax +49 471 48399910
www.cassens-plath.de
,
