background image

20 

EN

Error Messages/Display Messages

Message

Possible Causes

Action

LABEL LONGER 
THAN SETTING! 
OK/CANCEL

• This message appears 

when the length of the 
tape that will actually 
be printed is longer 
than the specifi ed 
tape length.

• To print, press 

OK

.

• To cancel printing, press 

You can then decrease the 
number of characters, change 
to a longer tape setting, or 
select auto tape length.

LOAD A TAPE 
CARTRIDGE 
12mm OR 18mm

• You are trying to use 

the Logo function 
while a 6mm (

1

/

4

") 

or 9mm (

3

/

8

") tape 

cartridge is loaded in 
the printer.

• Turn off the printer and replace 

the tape cartridge with a 
12mm (

1

/

2

") or 18mm (

3

/

4

") 

cartridge, and specify the tape 
width setting on the printer.

LOW BATTERY!

• Battery power is low. • Replace the batteries.

NO DATA!

• You are attempting 

to recall text from 
memory when there 
is none stored.

• Store the text in memory and 

then try again.

NO INPUT 
TEXT!

• You are attempting 

a print or preview 
operation when no 
text is input.

• Input the text and then try 

again.

PRINT ERROR!

• The tape became 

jammed during 
printing.

• Turn off the printer and 

remove the tape cartridge. 
Next, remove the jammed 
tape.

• If the steps described above 

do not clear the error message, 
contact your retailer or your 
nearest CASIO service center.

Message

Possible Causes

Action

PRINTER NOT 
SHUT DOWN 
PROPERLY 
LAST TIME

• You removed the 

batteries the last time 
power was turned on 
or while the message 

PLEASE WAIT

” 

was displayed, so the 
printer did not power 
down normally.

• Press any key to initialize the 

data that was partially deleted 
the last time the printer 
powered down.

TOO MANY
CHARACTERS!

• You are attempting 

to input more than 
80 characters of 
text.

• Reduce the number of input 

characters.

TOO MANY
LINES!

• The number of line 

breaks you input 
caused the label to 
exceed the maximum 
number of lines for 
the tape you are 
using.

• You are attempting 

to print more than 
three lines while an 
18mm (

3

/

4

") tape 

cartridge is loaded.

• You are attempting to 

print more than two 
lines while a 12mm 
(

1

/

2

") tape cartridge is 

loaded.

• You are attempting 

to print more than 
one line while a 6mm 
(

1

/

4

") or 9mm (

3

/

8

") 

tape cartridge is 
loaded.

• Use wider tape or reduce 

the number of lines. The 
maximum number of lines 
for each tape width is shown 
below.
6mm (

1

/

4

") tape...1 line 

9mm (

3

/

8

") tape...1 line 

12mm (

1

/

2

") tape...Up to 2 

lines 
18mm (

3

/

4

") tape...Up to 3 

lines

• Use wider tape or reduce the 

number of lines with frame.
The maximum number of lines 
for each tape width when 
printing with a frame is shown 
below. 
6mm (

1

/

4

") tape...1 line

9mm (

3

/

8

") tape...1 line

12mm (

1

/

2

") tape...1 line

18mm (

3

/

4

") tape...Up to 2 

lines

Summary of Contents for KL-HD1

































Reviews: