Casio KL-HD1, User Manual

Page: 18 / 32

16 EN
Part 9 Memory
You can store two blocks of text in memory, containing up of 80 characters.
Important!
x
Be sure to keep written backup copies of all important data.
To store text
1. Input the text you want to store.
2. Press
.
3. Use and to select
STORE
.
4. Press OK .
5. Use and to select the location where you want to store the text and
then press OK .
6. Press OK to store the text or to abort the store procedure without
storing anything.
x
If there is nothing stored at the memory location you selected yet,
pressing OK will store your text.
• If there is already text stored at the location, the message “ OVERWRITE?
OK/CANCEL ” will appear when you press OK . Press OK again to
replace the existing text with the new text, or to cancel the store
operation.
To recall text
1. While the input screen is on the display, press .
x
Note that recalled text will replace any input text currently on the display.
2. Use and to select RECALL .
3. Press OK .
4. Use and to select the text you want to recall and then press OK .
5. Press
OK
to recall the text or to cancel the recall operation.
x
This recalls the text.
x
If all of the recalled text does not fi t on the display, you can use and
to scroll it to the left and right.
x
Note that recalling text replaces anything that is currently on the input
display. Recalled text cannot be appended to existing text.
To delete stored text
1. While the input screen is on the display, press .
2. Press and to select DELETE .
3. Press OK .
4. Use and to select the text you want to delete and then press OK .
x
This will display the message “
DELETE? OK/CANCEL
” to confi rm.
5. Press OK to delete the text.