Casio KL-130, User Manual

Page: 24 / 35

22 EN
Part 11 Reference
Using the Separately Available AC Adaptor
The separately available AC adaptor (AD-A95100) lets you print without
loading batteries into the printer.
To connect the AC adaptor
Important!
• Use only the AC adaptor specifi ed for this printer.
1. Plug the AC adaptor plug into the AC adaptor
connection terminal of the printer.
2. Plug the AC adaptor into a household power outlet.
To disconnect the AC adaptor
Important!
• Do not disconnect the AC adaptor from the printer while printing is in
progress. Doing so can lead to malfunction.
1. Press the printer’s button to turn off power.
2. Unplug the AC adaptor from the power outlet.
3. Unplug the AC adaptor from the printers AC adaptor terminal.
Important!
• On either end of the power cord, avoid excessive bending, twisting, and
pulling. Do not store the power cord with either end bend. The above
conditions can cause the power cord to break and lead to printer malfunction.
• Make sure the AC adaptor cord does not block the tape outlet.
Tape outlet
Power cord
Cleaning the Printer Head and Roller
A dirty printer head and roller can result in poor print quality. If you have
problems with print quality, use the following procedure to clean the printer
head and roller.
To clean the printer head and roller
1. Make sure the printer is turned off.
2. Turn over the Label Printer, and open the back cover while pressing down
on its lock.
x
If a tape cartridge is loaded in the printer, remove it.
3. Use a cotton swab dipped in alcohol to clean the printer head and roller as
shown in the illustration.
Roller
Printer head
4. Replace the tape cartridge and close the printer cover.
Cleaning the Printer Exterior
Wipe the exterior of the printer with a cloth moistened with plain water.
Wring all excess liquid from the cloth before wiping the printer.
Never use benzene, alcohol, thinner, or other volatile agents to clean the
printer exterior. Doing so can damage the case.