Casio KL-130, User Manual

Page: 14 / 35

12 EN
You can specify a font for the text you have just input or you can specify a
default font that is used automatically whenever you create a new label.
Important!
x
The font setting is applied to all of the characters. You cannot make multiple
specifi cations for specifi c characters.
To change the default font setting
1. Press FUNC and then to display the SET UP menu.
2. Use and to select DEFAULT FONT and then press OK .
3. Use and to select the font you want to use as the default, and then
press OK .
x
The default font you specifi ed will be used initially for all new labels.
When inputting text, you can use the procedure above to change the
font to another style, if you want.
To change the font of text you have just input
1. After inputting the text you want, press FUNC and then .
2. Use and to select the font you want to change to and then press OK .
x
This will apply the setting and return to the text input screen.
Character Size
There are two methods you can use to set the character size: AUTO and
MANUAL. With AUTO, character size is set automatically in accordance with
the tape size you are using and the number of lines you are printing. MANUAL
lets you set the character size manually within the range of 1×1 to 4×6.
2×2
4×2
Important!
x
The maximum character size you can print depends on the size of the tape
you have loaded in the Label Printer and the number of lines of text you
are printing. If the character size you specify is greater than the maximum
characters size limit, the Label Printer automatically adjust your text
vertically to fi t as shown in the tables below.
Tape Width, and the Number of Lines and Maximum Vertical Size Factor
Tape Width
Number
of Lines 6mm 9mm 12mm 18mm
1 line 1× 2× 3× 4×
2 lines – – 1× 1×
3 lines – – – 1×