– 75 –
2. Remove the screws fixing the case.
To remove the middle case
1. Remove the 14pin I/F Board from the holder.
3. Open the case while paying attention to the FPC cable.
Remove the FPC cable from the connector.
2. Remove the FFC cable connecting from the key PCB to the
main PCB from the connector.
1
Remove the tape.
2
Remove the FFC cable from the connector.
Disconnect here
Remove the holder while widening
the space between the hooks.
1
2
8 pieces on the back of the case (Y-screws)
1 piece on the LCD
Be careful with the FPC
