Casio IT-10M20BR Manual Download Page 37

Page: 37 / 126

Power Supply

Charging the Battery with the AC Adaptor

Pull back the rubber cover from the AC adaptor jack and insert the cable. The

battery pack takes about 5 hours (when the Rugged PDA is turned off) to fully

charge, and then the left side indicator LED lights green. Under the same condi-

tions, the built in backup battery takes four hours to fully charge.

Remove the AC adaptor cable in the following order

➔

If the left side indicator LED goes out during charging, then the internal protection

circuit may have terminated charging. If this happens, remove the AC adaptor and

the battery pack from the Rugged PDA and then reattach them again and then

start charging again. If this happens frequently it may indicate a malfunction,

contact your original dealer or authorized CASIO distributor.

• You can use the Rugged PDA while it is charging. However, the time

to charge the Rugged PDA may vary greatly depending on the opera-

tions performed on the Rugged PDA (and the surrounding tempera-

ture or other factors).

• Charging requires a longer than normal time when doing initial setup

after purchase or when charging a newly purchased battery pack for

the first time.

Warning!

Use the AC adaptor specified by CASIO. Using the AC

adaptor that is not specified may cause a fire.

N o t e

When the battery pack is fully

charged, remove the AC adaptor

cable and be sure to replace the

rubber cover to its original position.

IT-10_1/25-39-E.p65

06.6.15, 6:40 PM

Summary of Contents for IT-10M20BR































































































































Search results

Summary of Contents for IT-10M20BR

Reviews:

Related manuals for IT-10M20BR

Brands by name

Popular brands

Casio IT-10M20BR, Manual

Search results

Summary of Contents for IT-10M20BR

Reviews:

Related manuals for IT-10M20BR

Brands by name

Popular brands