Casio IT-10M20BR Manual Download Page 109

Page: 109 / 126

109

Bridge Satellite Cradle

Using the Bridge Satellite Cradle

The optional AC adaptor (AD-S42120AE) is used to supply power to the Bridge

Satellite Cradle. Note that you cannot use the AC adaptor (AD-S15050AE) that

comes with the Rugged PDA.

Turn off the Bridge Satellite Cradle and the PC you will be connecting to

it.

Connect the specified AC adaptor to the Bridge Satellite Cradle connec-

tor.

On the back of the Bridge Satellite Cradle, remove the cover cap from the

USB port or the RS-232C connector. Take care not to lose the cap.

Connect an optional USB cable (DT-380USB) to the USB port, and an

optional RS-232 cable (DT-887AX or DT-882RSC or DT-883RSC) to the

RS-232C connector.

Turn on Bridge Satellite Cradle power.

The POWER lamp on the front of the cradle will light red.

Mount the Rugged PDA on the Bridge Satellite Cradle.

The POWER lamp on the front of the cradle will change to green.

IT-10_3/101-122.p65

06.6.15, 6:49 PM

109

Summary of Contents for IT-10M20BR































































































































Search results

Summary of Contents for IT-10M20BR

Reviews:

Related manuals for IT-10M20BR

Brands by name

Popular brands

Casio IT-10M20BR, Manual

Search results

Summary of Contents for IT-10M20BR

Reviews:

Related manuals for IT-10M20BR

Brands by name

Popular brands