112
Symptom
Power indicator lamp flashes red
immediately after charging.
FIVA beeps during operation.
FIVA suddenly hangs up.
System runs too slow (1).
System runs too slow (2).
System runs too slow (3).
Displayed date and time are wrong.
The screen temporarily goes white
when FIVA is starting up or when the
display mode is changed.
Recommended Action
Purchase a new battery pack and replace
the current one. Battery packs tend to lose
their ability to charge after long use.
Connect the AC adaptor and charge the
battery. Beeping indicates low battery power.
•
If you suspect that the problem is due to
low battery power, connect the AC adaptor
and charge the battery.
•
If you suspect that the problem is being
caused by the application you are using,
press the RESET switch and restart
Windows 98.
•
Try turning power off and then back on
again.
•
Memory may be low, which means you
have to increase it by installing a
separately available DIMM board.
If Power Management is causing the system
to go into the
Economy
Mode, try changing
the
Normal
Mode or turning Power
Management off.
See page 81
.
Turn power off and wait a while. Normal
operation should return after FIVA has a
chance to cool off.
•
Use the Control Panel to set the correct
date and time.
•
If the date and time seem to require
frequent setting, it may mean that the clock
battery is low. Contact your original dealer
or authorized distributor about having the
clock battery replaced.
This is normal and does not indicate any
malfunction or problem.
General Operation Problems
