87
Using Two Cameras at the Same Time (Multi
Camera Mode)
IMPORTANT!
• In addition to the camera that comes with the controller, you can also register the
camera model below on the controller.
– EX-FR100
*
or EX-FR200 camera
*
Update the camera’s firmware to the latest version.
Perform the steps below on the second camera before trying to register it on the
controller.
1.
Charge the camera’s battery (page 20).
2.
Prepare a memory card for the camera (page 31).
To use a second camera, you need to register it on the controller.
.
To register a second camera on the controller
1.
If there is a memory card loaded in the second camera, remove it.
2.
On the menu screen, touch the “
¥
Setup” tab.
3.
Touch “Multi-Pairing”.
4.
Touch “Add”.
5.
Touch “Start” to start registration of the camera.
6.
While holding down the shutter button of the camera you want to
register, hold down [
p
] (Power) for at least one second.
This will cause the operation lamp to flash orange to indicate that camera
registration has started.
When the camera is registered successfully, a message appears and then the
Multi Image screen appears.
Preparing a Second Camera to be Registered on the
Controller
Registering a Second Camera on the Controller
