153
Appendix
Display Messages
Access timed out.
Connection
dropped.
Appears when a connection could not be established with a
smartphone.
Battery is low.
This message appears when the camera or controller battery
goes dead.
Camera
connection was
lost. Power will
turn off.
A Bluetooth connection between the camera and controller
could not be established or maintained (page 151).
Card ERROR
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 115).
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Could not shoot
with both cameras.
Shooting simultaneously with two cameras in the Multi
Camera Mode is impossible due to insufficient memory
capacity or because a folder cannot be created. If you want
to record more, delete files you no longer need from the
applicable camera (page 38).
File could not be
saved because
battery is low.
Camera’s battery power is low, so an image file could not be
saved.
Folder cannot be
created.
You are trying to record a file while there are already
9999 files stored in the 999th folder. If you want to record
more, delete files you no longer need (page 38).
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
38).
Overheating.
Power will turn off.
The camera protection function may have activated because
camera and/or controller temperature is too high.
Turn off power and wait until the camera or controller cools
down before trying to use it again.
Some problem
occurred.
Cancelling interval
shooting.
Interval Shooting was cancelled due to insufficient memory
capacity or because a folder cannot be created. If you want
to record more, delete files you no longer need (page 38).
