16
Quick Start Basics
.
To use the hinge unit as a stand
.
To change the shooting direction by 90 degrees
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
• Align the camera’s operation lamp with the C
mark on the hinge unit.
• The indentations in the lens ring indicate the
orientation of the long dimension of the image
being shot.
.
To remove the hinge unit from the camera
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
Hinge Unit
Lens ring
[FREE] lever
Indentations
A B
C
A
[FREE] lever
