Casio EX-F1 - EXILIM Pro Digital Camera User Manual Download

Page: 106 / 186

106

Other Playback Functions (PLAY)

Other Playback Functions (PLAY)

This section explains menu items that you can use to configure settings and perform
other playback operations.

Procedure

[

] (PLAY)

[MENU]

PLAY Tab

Slideshow

For information about menu operations, see page 77.

Playing a Slideshow on the Camera (Slideshow)

Start

Starts the slideshow

Images

Specifies the type of images to be included in the slideshow
All images: Snapshots, movies, continuous shutter images
All images except

: All non-continuous shutter (CS) images

Only: Snapshots only

Only: Movies only

One Image: One single selected image (selected using [

] and [

])

Time

Time from the start to the end of the slideshow
1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes

Interval

Amount of time each image remains displayed
Use [

] and [

] to select a value from 1 to 30 seconds, or “MAX”.

If you specify a value from 1 to 30 seconds, movies play from beginning
to end.
When the slideshow reaches a movie file while “MAX” is selected, only
the first frame of the movie will displayed.

Effect

Select the effect you want.
Pattern 1 to 5: Plays background music and applies an image change

effect.

• Patterns 1 through 4 have different background music, but they all use

the same image change effect.

• Pattern 5 can be used for playback of snapshots only (except for

those that are part of a CS group), and the “Interval” setting is ignored.

• Movies that include audio are played back without BGM. Movies that

do not include audio are played back with BGM.

• The currently selected image change effect setting is disabled

automatically in following cases.
– When playing a slideshow for which “

Only” or “One Image” is

selected for the “Images” setting

– When the interval setting is 1 second or 2 seconds.
– Before and after playback of a movie
– During CS group playback

Off: No image change effect or background music

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera



























































































































































































Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands

Casio EX-F1 - EXILIM Pro Digital Camera, User Manual

Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands