Casio EX-F1 - EXILIM Pro Digital Camera User Manual Download Page 113

Page: 113 / 186

113

Other Playback Functions (PLAY)

Procedure

[

] (PLAY)

Snapshot Screen

[MENU]

PLAY Tab

Rotation

Use [

] and [

] to select “Rotation” and then press [SET].

Each press of [SET] will rotate the displayed image 90 degrees left.

When the displayed image is at the orientation you want, press
[MENU].

NOTE

• Rotation of movie images is not supported.
• Note that this procedure does not actually change the image data. It simply alters

how the image is displayed on the camera’s monitor screen.

• An image that has been protected or zoomed cannot be rotated.
• The original (unrotated) version of the image will be displayed on the 12-image

screen.

Procedure

[

] (PLAY)

Snapshot Screen

[MENU]

PLAY Tab

Resize

You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can resize an image to one of three image
sizes: 3M, 2M, VGA.

• Resizing a 16:9 or 3:2 size snapshot will create an image with an aspect ratio of

4:3, with both sides cut off.

• The recording date of the resized version of the snapshot will be the same as the

recording date of the original snapshot.

Rotating an Image (Rotation)

Resizing a Snapshot (Resize)

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera



























































































































































































Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands

Casio EX-F1 - EXILIM Pro Digital Camera, User Manual

Search results

Summary of Contents for EX-F1 - EXILIM Pro Digital Camera

Reviews:

Related manuals for EX-F1 - EXILIM Pro Digital Camera

Brands by name

Popular brands