Case WX90 Service Manual Download Page 45

Page: 45 / 51

SAFETY PRECAUTIONS

SR2-2-21

15501 9-35990

PREVENT PARTS FROM FLYING OFF

•

Tyres are charged with pressure.

- Tyre and/or rim parts burst may result in serious

injury or death.

- Only skilled staff can replace tyres.
- Always keep the correct tyre pressure.
- Never exceed the recommended pressure when

inflating tyres.

- Slow down or stop and let tyres get cool.
- When adjusting tyre pressure, keep at a certain

distance and protect yourself. Use an extension
equipped with a quick connection for the valve
handling.

- Always stay behind the tyre when adjusting

pressure.

F3635

F1463

STORE ATTACHMENTS SAFELY

•

Stored attachments such as buckets, hydraulic
breakers, and blades can fall and cause serious
injury or death.

- Securely store attachments and implements to

prevent falling. Keep children and bystanders
away from storage areas.

Summary of Contents for WX90




















































Search results

Summary of Contents for WX90

Reviews:

Related manuals for WX90

Brands by name

Popular brands

Case WX90, Service Manual

Search results

Summary of Contents for WX90

Reviews:

Related manuals for WX90

Brands by name

Popular brands